Be sure to heat the nozzle above 220℃ before switching to another nozzle!
| Quality | nozzle size | 0.4mm | 0.6mm | 0.8mm | 1.0mm |
| retraction distance | 0.5mm | 1mm | 1mm | 1mm | |
| z-hop height | 0.2mm | 0.3mm | 0.4mm | 0.5mm | |
| nozzle | 200℃ | 215℃ | 220℃ | 225℃ | |
| layer height | 0.2mm | 0.3mm | 0.4mm | 0.5mm | |
| first-layer height | 0.3mm | 0.48mm | 0.5mm | 0.65mm | |
| Walls | wall thickness | 0.8mm | 1.2mm | 1.6mm | 2.0mm |
| top/bottom line width | 0.4mm | 0.6mm | 0.8mm | 1.0mm | |
| inner/outer wall line width | 0.4mm | 0.6mm | 0.8mm | 1.0mm | |
| infill line width | 0.4mm | 0.6mm | 0.8mm | 1.0mm | |
| support line width | 0.4mm | 0.6mm | 0.78mm | 0.90mm | |
| wall ordering | outside to inside | inside to outside | outside to inside | outside to inside | |
| wall line count | 2 | 2 | 2 | 2 | |
| top/bottom wall line count | 2 | 2 | 2 | 2 | |
| top/bottom wall thickness | 0.8mm | 1.2mm | 1.6mm | 2.0mm | |
| Speed | printing speed | 200mm/s | 170mm/s | 110mm/s | 80mm/s |
| top/bottom printing speed | 40mm/s | 45mm/s | 40mm/s | 25mm/s | |
| top/bottom travel speed | 100mm/s | 112.5mm/s | 50mm/s | 80mm/s | |
| outer wall speed | 140mm/s | 120mm/s | 70mm/s | 50mm/s | |
| inner wall speed | 160mm/s | 140mm/s | 90mm/s | 60mm/s | |
| infill speed | 200mm/s | 150mm/s | 100mm/s | 50mm/s | |
| travel speed | 200mm/s | 170mm/s | 110mm/s | 80mm/s | |
| acceleration | print acceleration | 8000mm/s² | 3000mm/s² | 3000mm/s² | 3000mm/s² |
| outer wall acceleration | 8000mm/s² | 3000mm/s² | 3000mm/s² | 3000mm/s² | |
| inner wall acceleration | 8000mm/s² | 3000mm/s² | 3000mm/s² | 3000mm/s² | |
| top/bottom acceleration | 1000mm/s² | 1000mm/s² | 1000mm/s² | 1000mm/s² | |
| travel acceleration | 8000mm/s² | 3000mm/s² | 3000mm/s² | 3000mm/s² |